BGW GTA Specifications
IHF Method 4% Duty Cycle Burst Power	Bridged Mono	Dual Channel
8 Ohms	1600 W	450 W/ch
4 Ohms	2900 W	850 W/ch
2 Ohms	4200 W	1350 W/ch
Intermodulation Distortion	less than 0.03% at rated 8 ohm power output (SMPTE method, 60 Hz & 7 kHz, 4:1 ratio)
Rise Time	5.2 µs
Slew Rate	20 V/µsGN="ereo mode), 40 V/µs (mono mode)
Damping Factor	> 400:1 (ref. 8 ohms) below 1 kHz
Small Signal Frequency Response	1 Hz - 85 kHz, +0/-3 dB 20 Hz - 20 kHz, +0,-0.25 dB
Crosstalk	At least 100dB at 20Hz, at least 80dB at 1kHz, and at least 60dB at 20kHz
DC Offset Voltage	less than 10 mV
Hum and Nose Level (8 ohms 20 Hz - 20 kHz)	> 103 dB < 100 W (unwtd.) bal.
Voltage Gain	30 db/ch
Input Impedance (@ 8 ohm rated power)	15k ohms
Input Sensitivity	1.73 Vrms for rated 8 ohm output
Power Requirement	100, 120, 208, 220, 240VAC, 50-60Hz, NEMA 14-30P
Dimensions	5.25 X 19 X 14.5 (inches)
Weight	78 lbs (35.4 kg.) net, 83 lbs (37.6 kg.) shipping
Control	One 22 position detented rotary control precision input attenuator per channel. Attenuation steps of 0, -2 through -30 dB (2 dB steps), -33, -36, -42, -50, -60
Plarity Convention	XLR pin 2 hot/tip, pin 3 -/ring, pin 1 ground/sleve
Warranty	3 Years standard, parts/labor
ProNet Price	$ 2,299.00
Applications	Live Sound, Permanent Installation

Back to Top