| BGW Performance Series 2 Specifications |
| Power Output - Per Channel .1% THD @ 1kHz in Watts) |
| Stereo Mode | |
| 8 ohms |
300 |
| 4 ohms |
475 |
| Bridged Mono |
|
| 8 ohms |
1000 |
| Intermodulation Distortion |
Less than 0.05% at rated output
(SMPTE method, 60Hz & 7kHz, 4:1 ratio) |
| Small Signal Frequency Response |
8Hz - 175kHz +0, -3dB |
| DC Offset Voltage |
Less than 10 millivolts at output terminals |
| Hum and Noise Level |
Better than 100dB typical below rated
output into 8 ohms (A-wtd., 20Hz to 20kHz) |
| Min. Input Impedance (/ch) |
10k ohms balanced |
| Input Sensitivity |
0.775 Vrms for rated 8 ohm output |
| Voltage Gain |
34.2dB |
| Damping Factor |
Greater than 200:1 (ref. 8 ohms) |
| Load Impedance |
4 ohms or greater |
| Power |
Specify operation for either 120, 220 or 240 Volts AC, 50-60Hz |
| Dimensions |
|
| Height |
2U 3.25 inches (8.89 cm) |
| Width |
19 inch standard rack front panel (48.3 cm) |
| Depth |
12.6" |
| Weight Net/Shipping |
32/37 lbs |
| ProNet Price |
$ 995.00 |
| Applications |
Installed/Paging,
Commercial, Live Sound, Recording/Post Production, Broadcast,
Cinema/Exhibition/Presentation |
C Series
