Power Output - Per Channel
Dual Channel Mode
8 ohms 360 W/CH, @ 0.10% THD max. >1W, 20 - 20kHz
4 ohms 625 W/CH, @ 0.15% THD max. >1W, 20 - 20kHz
2 ohms 1000 W/CH, @ 0.25% THD max. >1W, 20 - 20kHz
Bridged Mono Mode
4 ohms 2000 W/CH, @ 0.25% THD max. >2W, 20 - 20kHz
Intermodulation Distortion Less than 0.03% at rated 8 ohm power output
(SMPTE method, 60Hz & 7kHz, 4:1 ratio)
Rise Time (small signal) 5.2 Microseconds
Slew Rate 20 V/Microseconds Stereo mode
40 V/Microseconds Mono mode
Voltage Gain 30dB each channel
CMRR Greater than 70dB, 20Hz - 20kHZ
Crosstalk At least 100dB at 20Hz, at least 80dB at 1kHz,
and at least 60dB at 20kHz
DC Offset Voltage Less than ±10mV
Small Signal 3Hz - 85kHz, +0,-3dB, Frequency Response 20Hz - 20kHz, +0,-0.2dB, ...with 2-Pole High Pass Filter -3dB @ 15Hz
Input Impedance 15kohms across (+) and (-) connectors
Input Sensitivity 1.73Vrms for rated 8 ohm output
Optional Internal Crossover: Two BGW XOVER card may be installed
Frequencies 100,200,300,400,500,600,700,800,1k, 2k, 3k, 4k, 5k,
6k, 7k or 8k
Frequency Selection Via internal DIP switch and decade jumpers
Filter Type 18dB/octave Butterworth (other filters available
on special order)
System S/N Ratio Better than 106dB (unweighted) 110dB A-weighted
Damping Factor 500:1 (ref. 8 ohms) below 500Hz
Power Requirements 100, 120, 208, 220, 240VAC, 50-60Hz; NEMA 14-30P
30 amp 125/250 4-wire 10 AWG cord (& outlet) supplied
Dimensions:
Height 5.25 inches
Width 19 inches
Depth 14.5 inches
Weight 78lbs. (35.4kg) net, 83lbs. (37.6kg) shipping
BGW GTB Specifications
Power Output - Per Channel
Dual Channel Mode
8 ohms 300 W/CH, @ 0.10% THD max. >1W, 20 - 20kHz
4 ohms 450 W/CH, @ 0.15% THD max. >1W, 20 - 20kHz
2 ohms 850 W/CH, @ 0.25% THD max. >1W, 20 - 20kHz*
Bridged Mono Mode
8 ohms 900 W/CH, @ 0.25% THD max. >2W, 20 - 20kHz
Intermodulation Distortion Less than 0.03% at rated 8 ohm power output
(SMPTE method, 60Hz & 7kHz, 4:1 ratio)
Rise Time (small signal) 4 Microseconds
Slew Rate 20 V/Microseconds Stereo mode
40 V/Microseconds Mono mode
Voltage Gain 30dB each channel
CMRR Greater than 70dB, 20Hz - 20kHZ
Crosstalk At least 95dB at 20Hz, at least 75dB at 1kHz,
and at least 55dB at 20kHz
DC Offset Voltage Less than ±10mV
Small Signal 3Hz - 85kHz, +0,-3dB, Frequency Response 20Hz - 20kHz, +0,-0.2dB, ...with 2-Pole High Pass Filter -3dB @ 15Hz
Input Impedance 15kohms across (+) and (-) connectors
Input Sensitivity 1.54Vrms for rated 8 ohm output
Optional Internal Crossover: Two BGW XOVER card may be installed
Frequencies 100,200,300,400,500,600,700,800,1k, 2k, 3k, 4k, 5k,
6k, 7k or 8k
Frequency Selection Via internal DIP switch and decade jumpers
Filter Type 18dB/octave Butterworth (other filters available
on special order)
System S/N Ratio Better than 106dB (unweighted) 110dB A-weighted
Damping Factor 500:1 (ref. 8 ohms) below 500Hz
Power Requirements 100, 110, 120, 200, 220, 240VAC, 50-60Hz;
(20 amp circuit for 120V nominal)
Dimensions:
Height 5.25 inches
Width 19 inches
Depth 13 inches
Weight 50lbs. (22.7kg) net, 57lbs. (26kg) shipping
* Single channel drivenNOTES
Due to continuous product improvements, all specifications and features are subject to change without notice.
BGW Systems Inc.