Amplifiers
Professional Series
Grand Touring Series
Performance Series
Product Info
Specification
Series 1
Series 2
Series 3
Series 3FL
Adapters
CX1
BGW Millennium Series
C Series
GT Series
VX Series
X Series

 Computers
 Subwoofers
 Racks & Rack Mount Acc.



Performance Series 1 (Discontinued)
Specifications

BGW Performance Series 1 Specifications
Power Output - Per Channel .1% THD @ 1kHz in Watts)
Stereo Mode  
8 ohms 190
4 ohms 290
Bridged Mono  
8 ohms 600
Intermodulation Distortion Less than 0.05% at rated output
(SMPTE method, 60Hz & 7kHz, 4:1 ratio)
Small Signal Frequency Response 8Hz - 175kHz +0, -3dB
DC Offset Voltage Less than 10 millivolts at output terminals
Hum and Noise Level Better than 100dB typical below rated
output into 8 ohms (A-wtd., 20Hz to 20kHz)
Min. Input Impedance (/ch) 10k ohms balanced
Input Sensitivity 0.775 Vrms for rated 8 ohm output
Voltage Gain 33.2dB
Damping Factor Greater than 200:1 (ref. 8 ohms)
Load Impedance 4 ohms or greater
Power Specify operation for either 120, 220 or 240 Volts AC, 50-60Hz
Dimensions  
Height 2U 3.25 inches (8.89 cm)
Width 19 inch standard rack front panel (48.3 cm)
Depth (w/autoformers) 12.6"
Weight Net/Shipping 26/31 lbs
ProNet Price $ 874.00
Applications Installed/Paging, Commercial, Live Sound, Recording/Post Production, Broadcast, Cinema/Exhibition/Presentation


Back to Top


Effective October 20, 2003, BGW Systems has been acquired by Amplifier Technologies, Inc. All engineering, design, manufacturing, sales, marketing and administration will now be handled by Amplifier Technologies, Inc. All correspondence/inquiries regarding The New BGW should be made to:

Amplifier Technologies, Inc.,
1749 Chapin Road
Montebello, California 90640.
Phone: 323-278-0001
Fax: 323-278-0083
Email: