BGW Millennium Series 2 (Discontinued)
Specifications

BGW Millennium Series 2 Specifications
Power Output (per Channel .1% THD, 20Hz - 20kHz continuous)
  Stereo Mode Bridged Mono (.25%THD)
16 Ohms 150 400
8 Ohms 300 600
4 Ohms 475  
Transformer Outputs (1kHz, 0.1% THD)
70/100V 300
140/200V 600
Intermodulation Distortion Less than 0.05% at rated output
(SMPTE method, 60Hz & 7kHz, 4:1 ratio)
Frequency Response 20Hz or 40Hz (selectable) to 150kHz +0, -3dB
Transformer Outputs 40Hz - 15kHz, +0, -3dB
DC Offset Voltage Less than 10 millivolts at ouput terminals
Hum and Noise Level 100dB below rated output into 8 ohms
(20Hz to 20kHz unweighted)
Min. Input Impedance (/ch) 10k ohms balanced
Input Sensitivity 0.775 Vrms for rated 8 ohm output
Voltage Gain 31.2dB, 36.3X 34.2dB, 51.3X
36dB, 63.1X
Damping Factor Greater than 200:1 (ref. 8 ohms)
Output Regulation 100V or 70V tap; less than 1.0dB
High Pass Filter 18dB/Oct. Butterworth, internally adjustable, 20 or 40Hz
Power 100, 115, 230 VAC, 50-60Hz
650VA/480W
Dimensions
Height 3U 5.25 inches (13.3 cm)
Width 19 inch standard rack front panel (48.3 cm)
Depth (w/autoformers) 12.8", (14.6")
Weight Net/Shipping 34/38 lbs
ProNet Price $ 925.00
Applications Installed/Paging, Commercial, Live Sound, Recording/Post Production, Broadcast, Cinema/Exhibition/Presentation


Back to Top


Effective October 20, 2003, BGW Systems has been acquired by Amplifier Technologies, Inc. All engineering, design, manufacturing, sales, marketing and administration will now be handled by Amplifier Technologies, Inc. All correspondence/inquiries regarding The New BGW should be made to:

Amplifier Technologies, Inc.,
1749 Chapin Road
Montebello, California 90640.
Phone: 323-278-0001
Fax: 323-278-0083
Email: