BGW Millennium Series 3TMC-2 (Discontinued)
Product Info & Specifications

The BGW Millennium Series Model 3 is available with a factory installed, internally mounted, TMC-2 Bi-Amp crossover/processor card.

This additional feature allows the user to fine tune the crossover points, equalization, attenuation and delay line all within the amplifier. The TMC-2 card is fully accessible above the input connectors on the rear of the amplifier and is protected by a metal security cover.

Modifications:

• Level Controls and LED indicators on the front panel read LF (Low Frequency) and HF (High Frequency) replacing Channel A and Channel B respectively
• Channel B input connector and bridge mono switch have been eliminated
• Output binding posts are labeled Low Frequency and High Frequency
• Signal/Chassis ground lift switch has been added
• A low frequency line level output can be installed in place of the 1/4" input-specify option

• Saves the cost of additional external crossovers and processing
• Frees up additional rack space
• Simplifies installation
• Reduces installation time
• Increased power

• Master Level Attenuator:
  0dB to -20dB
• High Frequency Level Attenuator:
  0dB to -20dB
• Low Frequency level Attenuator:
  0dB, -10dB
• Using a 4 ohm low frequency cabinet, the power output increases at least 1db (550 watts)
• Clipping Eliminator (limiter) In/Out Switch
• Fixed 30Hz 18dB per Octave High Pass Filter for woofer over-excursion protection. Settings of 20Hz, 25Hz, 35Hz and 40Hz can be selected internally by moving jumpers
• Switch selectable 500Hz and 800Hz 24dB per Octave Linkwitz-Riley crossover filters
• Switch selectable asymmetric (Cinema) 500 Hz and 800Hz High Pass Filter for smoother acoustic roll of below crossover frequency
• Switch selectable Screen Loss Equalization
• Switch selectable Constant Directivity Horn Equalization featuring separate hinge frequency for Large Format or Small Format CD horns, continuously variable EQ control having 0 to +9dB of boost and an EQ defeat switch
• Switch selectable 700µSec and 1.9mSec Low Freuency delay line for time arrival compensation at the crossover between the physically displaced HF horn driver and LF drivers commonly used in screen channel loudspeakers (such as JBL 4670C, 4673C, 4675C, EV TS940, TS9040DLX, Altec A6 and A10.) Delay defeat switch provided for earlier systems not requiring delay

Back to Top

Effective October 20, 2003, BGW Systems has been acquired by Amplifier Technologies, Inc. All engineering, design, manufacturing, sales, marketing and administration will now be handled by Amplifier Technologies, Inc. All correspondence/inquiries regarding The New BGW should be made to:

Amplifier Technologies, Inc.,
1749 Chapin Road
Montebello, California 90640.
Phone: 323-278-0001
Fax: 323-278-0083
Email: